6800+ Series Safety Instructions and Standards 1
Important Safety Instructions
Review the following safety precautions to avoid injury and
prevent damage to this product or any products connected to
it. Read these instructions. Keep these instructions. Heed all
warnings. Follow all instructions.
Servicing
Only qualified personnel should perform service procedures.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
CAUTION
All Processing modules, that is modules that are not Distribution Amplifiers,
must be housed in frames with fans. For fanned frames, the internal
temperature is properly managed by keeping the front panel closed and all
back connector slots covered during operation to prevent the risk of
overheating. Unfanned frames can be safely loaded with Distribution
Amplifier modules only.
WARNING
When powered by DC, the power input terminals of this equipment may
provide access to hazardous energy levels. Under these circumstances,
this equipment must be installed to restrict access (requiring keys or tools)
to the DC terminals to only service persons with appropriate training.
6800+ Safety Manual.book Page 1 Wednesday, November 16, 2011 4:27 PM
To Next Page
Loading...