Certifications and Compliance
12 6800+ Series Safety Instructions and Standards
Additional EMC Information
This device is for professional use in a controlled EMC
environment, such as purpose-built broadcast studios. EMC
regulations require that the radiation emitted from this unit
does not exceed certain limits. These limits are only met when
the front panel is closed and the two thumb screws are
secured.
Compliance to the EMC regulations is also dependent on the
use of suitably shielded (screened) cables. Coax cables should
be of the double-shielded (screened) variety. Unused BNCs
should be fitted with 75
terminations.
All audio cables should be screened with the shield (screen)
making good contact with the metallic parts of the cable
connectors.
D-type connectors used with this unit should always have
metallic shells with the shield (screen) of the cable
mechanically bonded to the metal shell. It is further
recommended that the D-type cable connectors be of the
"dimple" variety. These connectors make a better contact and
consequently improve EMC performance.
6800+ Safety Manual.book Page 12 Wednesday, November 16, 2011 4:27 PM
To Next Page
Loading...