6800+ Series Safety Instructions and Standards 3
Important Safety Instructions
Product Damage Precautions
Do Not Use This Apparatus Near Water
Clean Only with a Dry Cloth
Do Not Block Any Ventilation Openings
Do not block any of the ventilation openings. Install in accordance with the
manufacturer’s instructions.
Keep Product Away from Heat Sources
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Protect the Power Cord
Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only Use Attachments/Accessories Specified by the Manufacturer
Use with Proper Equipment
Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug During Storms and When Inactive
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Do Not Operate With Suspected Failures
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as if the
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, or the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
Use Proper Power Source
Do not operate this product from a power source that supplies more than
the specified voltage.
Install Near Socket Outlet
The equipment shall be installed near the socket outlet, and a disconnect
device shall be easily accessible.
Attention:
Observe precautions for handling electrostatic-sensitive devices.
6800+ Safety Manual.book Page 3 Wednesday, November 16, 2011 4:27 PM
To Next Page
Loading...