Harris FR6822+ - Page 85

FR6822+ Frames
Installation and Operation Manual
71
Copyright © 2008-2011, Harris Corporation
 VxWorks login: leitch
 Password: LeitchAdmin
After you login, you will have access to the following commands via the Telnet interface:
 getipaddr
 getmacaddr
 setipaddr
 reboot
getipaddr
Definition
This command returns the IP address of the target module.
Syntax
getipaddr
Response
The getipaddr command returns the IP address of the target module in the following
format:
IP Address: 10.1.1.101
Subnet Mask: 255.255.255.0
Gateway Address: 10.1.1.100
Alternatively, if the parameter is not configured, the output may appear in this format:
IP Address: 10.1.1.101
Subnet Mask: <deleted>
Gateway Address: <deleted>
getmacaddr
Definition
This command returns the MAC address of the target module.
Table 4-8 getipaddr Commands and Parameters
Command Description Parameter
getipaddr Get IP information None