360077-1/O 21
i.Series® - All Models
7.4 Drawer Labels
Drawer with label holder
shown (labels not provided).
7.5 Move Slides and Brackets
Remove drawer slides:
1 Using a screwdriver, remove front bracket retainers.
2 Tap front brackets upward to disengage standards.
3 Remove slides from standards.
Install drawer slides:
1 Insert slides into standard at appropriate height.
2 Tap front brackets downward to engage standards.
3 Using a screwdriver, install front bracket retainers.
Remove shelf brackets:
1 Using a screwdriver, remove front bracket retainers.
2 Tap front brackets upward to disengage standards.
3 Remove front brackets from standards.
Install shelf brackets:
1 Insert front brackets into standard at appropriate height.
2 Tap front brackets downward to engage standards.
3 Using a screwdriver, install front bracket retainers.
7.6 Optional Adapter Kits for Medication Dispensing Locks
Contact Helmer Technical Service or your distributor for service documentation pertaining to medication
dispensing locks.
To Next Page
Loading...
