360077-1/O 8
General Information
Section I: General Information
1 About this Manual
1.1 Intended Audience
This manual is intended for use by end users of the refrigerator and authorized service technicians.
1.2 Model References
Generic references are used throughout this manual to group models that contain similar features.
For example, “125 models” refers to all models of that size (iB125, HB125, iHB125, HHB125, iLR125,
HLR125,iPR125,HPR125).Thismanualcoversalluprightrefrigerators,whichmaybeidentiedsingly,
by their size, or by their respective “Series.”
1.3 Copyright and Trademark
Helmer
®
, i.Series
®
, i.Center
®
, Horizon Series™, and Rel.i™ are registered trademarks or trademarks of
Helmer, Inc. in the United States of America. Copyright © 2014 Helmer, Inc. All other trademarks and
registered trademarks are the property of their respective owners.
Helmer,Inc.,doingbusinessas(DBA)HelmerScienticandHelmer.
2 Safety
TheoperatorortechnicianperformingmaintenanceorserviceonHelmerScienticproductsmust
(a) inspect the product for abnormal wear and damage, (b) choose a repair procedure which will not
endanger his/her safety, the safety of others, the product, or the safe operation of the product, and (c)
fully inspect and test the product to ensure the maintenance or service has been performed properly.
2.1 SafetyDenitions
The following general safety alerts appear with all safety statements within this manual. Read and abide
by the safety statement that accompanies the safety alert symbol.
WARNING The safety statement that follows this safety alert symbol indicates a hazardous situation
which, if not avoided, could result in serious injury.
CAUTION The safety statement that follows this safety alert symbol indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE The safety statement that follows this safety alert symbol indicates a situation which, if
not avoided, could result in damage to the product or stored inventory.
To Next Page
Loading...
