360077-1/O 39
i.Series® - All Models
9.2 Level 2 Parameters and Values
Parameter Description Default Value
Display of SP1 output power percentage (read-only) (read only)
Selection for manual control of power for SP1 oFF
SP1 power limit percentage 100
SP2 power limit percentage (cooling) 0
Main SP2 operating mode (alarm strategy) nonE
Subsidiary SP2 mode nonE
Display resolution 0.1°
Full scale 20.0
Minimum scale 0.0
Input sensor type rtd
Units (°C/ °F) °C
Parameter level currently selected 2
9.3 Level 3 Parameters and Values
Parameter Description Default Value
SP1 output device type SSd1
SP2 output device type (read only) SSd2
Sensor burn-out protection type (upscale or downscale) uP.SC
Output mode (reverse or direct) 1d.2d
LED indicator modes for SP1 and SP2 (normal or inverted) 1i.2n
Sensor span adjust 0.0
Zero sensor error (calibration across full scale) 0.0
Selection for the control accuracy monitor oFF
Read control accuracy monitor results (variance) UAr°
Read autotune tuning cycle data Ct A
Software version (Select this parameter to access Level
4 parameters)
392b
Functions reset nonE
Parameter level currently selected 3
To Next Page
Loading...
