User Manual of Digital Video Recorder
142
Figure 8. 17 Set Arming Schedule of VCA Alarm
5. Select Linkage Action tab to set linkage actions of the VCA alarm (please refer to Chapter 8.7).
6. Select PTZ Linking tab, set PTZ linkage of the VCA alarm, and click Apply to save the settings.
The PTZ linking is supported by IP cameras only.
Please check whether the PTZ or speed dome supports PTZ linkage.
Figure 8. 18 Set PTZ Linking of VCA Alarm
7. Click Apply to save the new settings.
To Next Page
Loading...
Need help?
General