Panic Alarm Master Station • User Manual
17
Steps:
On the Group page, click All Devices to enter the page.
Select and click an alarm device to enter the alarm device configuration page.
Tap Call Settings, and click Call Keep Audio to select an audio file in the pop-up window. You are able to
select the audio file from local file list or SD card file list as the call waiting audio.
Note: The local audio file comes with the device. The SD card audio file requires to be uploaded, and you
need to insert the SD card into the microSD card interface for using the SD card audio file.
Optional: Tap Copy to to copy the call waiting audio to other alarm devices.
Tap OK.
Configuring Call Forwarding of Alarm Device
Purpose:
In this section, you are able to configure the hubbub alarm parameters for the alarm devices.
Steps:
On the Group page, click All Devices to enter the page.
Select and click an alarm device to enter the alarm device configuration page.
Tap Advanced Settings to enter the page.
Hubbub Alarm parameters configuration
Hubbub Alarm: Slide the slider to enable Hubbub Alarm, by default, it is disenabled.
Sudden Increase of Sound Intensity: Slide the slider to enable Sudden Increase of Sound Intensity, by default,
it is disenabled. You need to set sudden increase parameters, including detection sensitivity and threshold.
The available sensitivity value and threshold is between 1 and 100.
To Next Page
Loading...
Need help?
General
