Hioki 3227 - Page 114

102
────────────────────────────────────────────────────
8.4 Command Reference
────────────────────────────────────────────────────
Synta
x
:MEASure:TEMPerature?
Functio
n
Returns the current temperature measurement value as a numerical value
in NR2 format.
Respons
e
If headers are ON
If headers are OFF
:MEASURE:TEMPERATURE data
data
data (mark) □□. □□ - numerical value in NR2 format
Erro
r
When the measurement mode is set to the resistance measurement, the
execution error is generated.
Exampl
e
If headers are ON
If headers are OFF
Transmission
Response
:MEAS:TEMP?
:MEASURE:TEMPERATURE 12.34
:MEAS:TEMP?
12.34
Synta
x
:RESIstance:AUTO data
dat
a
ON, OFF (character data)
Functio
n
Sets whether the auto range is ON or OFF.
Erro
r
The execution error is generated in the following circumstances.
･ When the measurement mode is set to the temperature measurement.
･ When using the comparator.
･ When "OFF" is specified for the temperature conversion display.
Exampl
e
Transmission
:RESI:AUTO ON
The resistance measurement is executed in the auto range.
:MEASure:TEMPerature?
:RESIstance:AUTO