Hioki 3332 - Page 219

205
────────────────────────────────────────────────────
11.2 Standard Specifications
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Measurement items
Refer to "Processing and calculation" table
Voltage, current, active power, apparent power, reactive power, power
factor, phase angle, current peak, frequency, integration power,
integration current
Display update rate
Approx. 200 ms (5 times/second)
Number of display item
4items
Measurement range
Voltage 15/30/60/150/300/600 V, auto-range
Current 1/2/5/10/20/50 mA
0.1/0.2/0.5/1/2/5/10/20/50 A auto-range
Power automatically decided voltage range and current range (see
Table 1)
(auto-range) "Up" when over 110%f.s. for range or peak over.
"Down" when input under 30% for range or input below
90% of lower-bit range
Frequency 500 Hz/100 kHz/ auto-range
(auto-range) "Up" for over 100% for range
"Down" for under 0.4% for range
Effective input range
Voltage, current, power
5 to 120% for range (5 to 100% for range, only 600 V
range)
Frequency 0.4 to 100% for frequency range (with input of 10 to 130%
for measurement range of voltage, current, and power)
Others According to the effective input range of voltage, current,
and power
Characteristics of voltage,
current, and active power
Measurement accuracy
23℃±5℃ (73
｡
F±9
｡
F), 80% RH or less, sine wave, power factor = 1,
warm-up time = 30 minutes
Guaranteed accuracy period: six months
*1: The measurement accuracy when response time is SLOW
*2: With 10A maximum input current
*3: The accuracy at 30 to 50 A input, 50/60 Hz only
*4: Enable the averaging function when measurement values are scattered
Frequency
Voltage, Current, Active
power
Current, Active power
under 20 A input (*4) 20 A to 30 A input 30 A to 50 A input
1Hzto2Hz(*1)
2Hzto5Hz(*1)
5Hzto10Hz(*1)
10 Hz to 20 Hz (*1
)
20 Hz to 30 Hz (*1
)
30 Hz to 45 Hz (*1
)
45 Hz to 66 Hz
66 Hz to 500 Hz
500 Hz to 4 kHz
4 kHz to 10 kHz
10 kHz to 20 kHz
20 kHz to 50 kHz
50 kHz to 100 kHz
±12.0%f.s.
±5.0%f.s.
±1.5%f.s.
±1.0%f.s.
±0.5%f.s.
±0.1%rdg.±0.2%f.s.
±0.1%rdg.±0.1%f.s.
±0.1%rdg.±0.2%f.s.
±0.3%rdg.±0.2%f.s.
±1.0%f.s.
±2.0%f.s.
±5.0%f.s.
±15%f.s. (*2)
±12.0%f.s.
±5.0%f.s.
±1.5%f.s.
±1.0%f.s.
±0.5%f.s.
±0.1%rdg.±0.2%f.s.
±0.1%rdg.±0.1%f.s.
±0.1%rdg.±0.2%f.s.
±0.3%rdg.±0.2%f.s.
±2.0%f.s.
±0.2%f.s. (*3)
11.2 Standard Specifications