208
────────────────────────────────────────────────────
11.3 Function Specifications
────────────────────────────────────────────────────
(1) Voltage, Current, Active Power Measurement (Indicated as V, A, or W on the display)
Display limit
0.1% to 130% of the range
(Displays ±0.0000 m to ±99999 M in scaling function. For "-"
display, active power only)
Current is displayed from 0.1% of the range or 40 μA, and
voltage is displayed from 0.2% of the range.
Out of range display
Displays "o.r" (out of range) when the input exceeds 130% of the
range.
Over input warning
When the peak value of voltage or current input waveform is more
than 6 times of range, OVER lamp is lit.
(2) Apparent Power, Reactive Power Measurement (Indicated as VA or var on the display)
Display limit
0% to 169% of the range
(Displays ±0.0000 m to ±99999 M in scaling function.)
Out of range display
If either the voltage or current is out of range, "o.r" will be
displayed. For the reactive power, "o.r" will be also displayed
when the active power is out of range.
Polarity display
Reactive power:
When the current is leading(LEAD) compared to the voltage "－",
when it is lagging(LAG) no notation.
Apparent power: no polarity
(3) Power Factor Measurement (Indicated as PF on the display)
Display limit ±0.0000 to ±1.0000
Out of range display
If either the voltage, current or active power is out of range, "o.r"
will be displayed.
When the apparent power is 0, "o.r" is displayed.
Polarity display
When the current is leading(LEAD) compared to the voltage "－",
when it is lagging(LAG) no notation.
(4) Phase Angle Measurement (Indicated as
○
on the display)
Display limit
+180.00 to -180.00
Out of range display
When the power factor is "o.r" indication, displays "o.r".
Polarity display
When the current is leading(LEAD) compared to the voltage "－",
when it is lagging(LAG) no notation.
11.3 Function Specifications
To Next Page
Loading...
