Operating Precautions
4
Operating Precautions
Follow these precautions to ensure safe operation and to obtain the
full benefits of the various functions.
• Before using the instrument the first time, verify that it operates
normally to ensure that the no damage occurred during storage or
shipping. If you find any damage, contact your dealer or Hioki
representative.
• Before using the instrument, make sure that the insulation on the
probes and cables is undamaged and that no bare conductors are
improperly exposed. Using the instrument in such conditions could
cause an electric shock, so contact your dealer or Hioki
representative for replacements.
Before Use
Handling the Instrument
• Do not allow the instrument to get wet, and do not take
measurements with wet hands. This may cause an electric
shock.
• Never modify the instrument. Only Hioki service engineers
should disassemble or repair the instrument. Failure to observe
these precautions may result in fire, electric shock, or injury.
• Do not use the instrument where it may be exposed to
corrosive or combustible gases. The instrument may be
damaged or cause an explosion.
To avoid damage to the instrument, protect it from physical shock
when transporting and handling. Be especially careful to avoid
physical shock from dropping.
To Next Page
Loading...
