Hioki 3541 - Timing Chart

83
6.3 Timing Chart
Non-Free-Run Timing Chart ______________________________________
Free-Run Timing Chart __________________________________________
6.3 Timing Chart
TRIG入力
測定開始信号
EOC出力
測定終了信号
INDEX出力
参照信号
Hi , IN , Lo , BIN , BCD
コンパレータ結果
BIN No.、BCDデータ
接触状態 チャック 開放
ERR出力
測定異常
変換終了
t1 t1
t5
t2
t4
測定中
t3
測定電流 ONOFF
Contact State
ERR Output
Measurement Fault
(Err Output ASYNC Setting)
TRIG
Input
Measurement start signal
Measurement current*1
INDEX Output
Reference Signal
EOC Output
End-of-Measurement Signal
Comparator Result
BIN No., BCD data
Err Output (Err Output SYNC
Setting)
Contact
Open
End of Conversion
Measuring
*1: However, in the 200 Ω or higher resistance ranges, current flows continuously.
EOC出力
測定終了信号
INDEX出力
参照信号
Hi , IN , Lo , BIN , BCD
コンパレータ結果
BIN No.、BCDデータ
t5t4
測定中
t3
測定中
Measuring Measuring
t3
t4 t5
INDEX Output
Reference Signal
EOC Output
End-of-Measurement
Signal
Hi, IN, Lo, BIN, BCD
Comparator Result
BIN No., BCD data