1
Introduction
Introduction
Thank you for purchasing the HIOKI “Model 3541 RESISTANCE
HiTESTER". To obtain maximum performance from the instrument,
please read this manual carefully, and keep it handy for future
reference.
Inspection
Confirming
package contents
When you receive the instrument, inspect it carefully to ensure that no
damage occurred during shipping. In particular, check the
accessories, panel switches, and connectors. If damage is evident, or
if it fails to operate according to the specifications, contact your dealer
or Hioki representative.
Instrument 3541 RESISTANCE HiTESTER
Accessories • 9287 CLIP TYPE LEAD .........................................1
• 9451 TEMPERATURE PROBE..............................1
• Instruction Manual..................................................1
• Power Cord (2-line + ground).................................1
• EXT I/O Male Connector ........................................1
Shipping
precautions
Use the original packing materials when transporting the instrument, if
possible.
Options
Test-Lead-Related
(Page 176)
• 9452 CLIP TYPE LEAD
• 9453 FOUR TERMINAL LEAD
• 9455 PIN TYPE LEAD (for ultra precision)
• 9461 PIN TYPE LEAD
• 9465 PIN TYPE LEAD
• 9467 LARGE CLIP TYPE LEAD
• 9454 ZERO ADJUSTMENT BOARD
• 9300 CONNECTION CABLE (Available Soon)
Interface
Cable
• 9637 RS-232C CABLE (9-pin to 9-pin/cross cable)
• 9638 RS-232C CABLE (9-pin to 25-pin/cross cable)
• 9151-02 GP-IB CONNECTOR CABLE (2 m)
• 9151-04 GP-IB CONNECTOR CABLE (4 m)
Printer-Related • 9670 PRINTER (BL-80RS II, made by SANEI ELECTRIC INC.)
• 9671 AC ADAPTER (for the 9670, BL-100W, made by SANEI
ELECTRIC INC.)
• 9672 BATTERY PACK (for the 9670)
• 9673 BATTERY CHARGER (for the 9672)
• 9237 RECORDING PAPER (80 mm x 25 m, 4 rolls, for the 9670)
• 9638 RS-232C CABLE (for 3541-9670)
To Next Page
Loading...
