Hioki 3541 User Manual

21
2.4 Connecting the Temperature Probe
2.4 Connecting the Temperature Probe
Do not apply voltage to the TC SENSOR jack, to avoid electric
shock accidents or damage to the instrument.
To avoid damage to the instrument or temperature probe, observe the
following precautions:
• Turn the instrument off before plugging or unplugging the
temperature probe.
• The temperature probe is not waterproof. Do not submerse it in
water or other liquid.
Rear Panel
1. Confirm that the instrument power is
turned OFF.
2. Plug the 9451 TEMPERATURE
PROBE into the TC SENSOR jack on
the rear panel.
Insert the plug securely all the way
into the jack.
9451 TEMPERATURE PROBE Connection
9451 TEMPERATURE PROBE

Hioki 3541 Specifications

General

Display	LCD
Operating Temperature	0°C to 40°C
Measurement Frequency	1 kHz
Basic Accuracy	±0.1%
Basic Accuracy (Ohms)	±0.1% rdg. ±5 dgt.
Test Signal Current	1 mA (typical)
Test Current	1 mA (typical)
Power Supply	AC adapter or 6 x AA batteries
Power Supply (AC)	100 to 240 V AC (using AC adapter)
Dimensions	192 mm W
Measurement Range (Frequency)	12Hz to 1MHz