Hioki 3541 - Initialization Items; Local Function

111
8.4 Communication Methods
8.4.5 Initialization Items
*1 Only the MAV bit (bit 4) is cleared.
*2 All bits except the MAV bit are cleared.
*3 Except the PON bit (bit 7).
8.4.6 Local Function
During communications, REMOTE is lit to indicate the remote control
state.
To cancel the Remote
state
● = initialized, − = not initialized
Initialization Method
Item
At Power-
on
∗RST
Command
Device
Clear
∗CLS
Command
Device-specific functions
(Range, etc.)
− ● −−
Output Queue
● − ● −
Input buffer
● − ● −
Status Byte Register
● −
−
*1 ● *2
Event registers
● *3
−−●
Enable register
● −−−
Current path
● − ● −
Headers on/off
●● −−
REMOTE off
If the Local Lock Out (Page 110) GP-IB command has been issued,
the Remote state cannot be canceled.