Hioki 3541 - Reset Function

73
5.14 Reset Function
Function
Description
Two Reset methods are available:
• Reset
Re-initializes all measurement settings except for Panel Save data
to their factory defaults.
• System Reset
Re-initializes all measurement settings, including Panel Save data,
to their factory defaults.
5.14 Reset Function
Executing Reset or System Reset
1
(SHIFT Lamp lit)
The Menu display appears.
2
The Reset display appears. (Refer to the Menu display (Page 15))
3
Select the Reset method on the Sub Display.
SEt....... Reset (initializes measurement settings other than those
stored with Panel Save)
SYS...... System Reset (initialize all measurement settings)
4
ENTER blinks.
5
Executes the Reset.
To cancel:
Returns to the Measurement display without resetting.
(Main Display)
(Sub Display)
(Sub Display)
System Reset also initializes Panel Save data.