5.5 Temperature Conversion Function (
∆
t)
60
Function
Description
The temperature conversion principle (Appendix 3 Temperature
Conversion Function (∆t) (Page 172)) is used to derive temperature
increase over time.
The Temperature Conversion function is disabled at the factory before shipping.
Use the following procedure to enable the Temperature Conversion function. In this case, the
Temperature Correction function is disabled.
5.5 Temperature Conversion Function (∆t)
When using the Temperature Conversion function, the following
functions are not available:
Comparator, BIN and Statistical Calculation functions
Selecting the Temperature Conversion Function
1
(SHIFT Lamp lit)
The Menu display appears.
2
The TC/∆t selection display appears. (Refer to the Menu display
(Page 15))
Select Conv (Temperature Conversion).
3
Applies setting and returns to the Measurement display.
(Main Display)
(Sub Display)
To Next Page
Loading...
