Hioki LR8431-20 - Selecting the Manual Saving Method [Quick Save];[Select & Save]

6.3 Saving Data
98
Two manual saving methods are available: [Quick Save] and [Select & Save], both
of which offer the same setting options.
When saving measurement data, folders are created on
the CF card or USB flash
drive for each data type, and files are automatically numbered (p.91)
.
Selecting the Manual Saving Method [Quick Save]/[Select & Save]
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions.
1
2
Select the [System] Screen.
Selecting [SAVE Key Operation] setting options.
Setting options:( default setting)
Select & Save
Pressing SAVE displays a dialog. Select the type of contents to be
saved, and save the data.
Quick Save Pressing SAVE saves data according to the settings on the [Sys-
tem] screen.
The Save dialog appears.
Select from the saving options
in this dialog.
• Save Waveforms (p.99)
• Save Screen Image (p.100)
• Save Numerical Calculation
Results (p.101)
• Save Settings (p.102)
Setting items are displayed.
Select your saving options.
[Select & Save]
[Quick Save]