Hioki LR8431-20 - Disabling Key Operations (Key-Lock Function); Saving Data

1.5 Basic Operation
23
3
1
Chapter 1 Overview
Keys can be disabled to avoid inadvertent operations.
Measurement data, settings, screen images a
nd numerical calculation results
can be saved.
For details of the saving methods, see Chapter 6, "Saving & Loading Data" (p.
91).
(Default settings)
Saving Method: [Select & Save] (Press the SAVE
key to select and save
data.)
Disabling Key Operations (Key-Lock Function)
Saving Data
Press and hold the right and left cursor keys for three
seconds to lock the other keys, and repeat to unlock.
Insert a CF card or
USB flash drive.
Press the
SAVE key.
A dialog appears.
Select the save destination
and item to save, and press
ENTER key. 
Select
[Yes] in the confirma-
tion dialog, and press ENTER
again to save the data to the
CF card or USB flash drive.
• When using a USB flash drive, set the USB mode on the [Sys-
tem] screen to [USB Memory]. USB flash drives cannot be used
while th
e USB mode setting is [USB Communication] or [USB
Drive].
• The [USB Memory], [USB Communication], and [USB Drive]
USB mode sett
ings are exclusive and cannot be used simulta-
neously.