Select the Waveform Screen.
You can select it from the [Setting] screen.
Enable (set to [On]) numerical
calculation.
1
2
4
Apply
Open the setting options
for the item to be set.
Analyze (p. 81)
The results of numerical calcula-
tions are displayed.
The displayed calculation results
are determined by the selected cal-
culation number.
Start and finish measuring.
5
Select [Exec].
Apply
6
7
Select [Calc1] to [Calc4]
and move to the setting
options.
3
Select [Wave+Calc] display.
Select the calculation type.
Calculation types:
Average, P-P, Maximum, Minimum, Time To Max., Time To Min.,
(or Off, the default)
To Next Page
Loading...
