8.1 Screen and Key Operation Settings
121
3
8
Chapter 8 System Environment Settings
A backlight saver can be activated after a specified number of minutes during which
no operation key is pressed. The backlight saver turns off the backlight of the LCD,
prolonging the lifetime of the backlight by turning it off when not needed.
To deactivate the backlight saver, press any key. The operating screen appears
again.
While the backlight saver is active, the Memory HiLogger’s measuring state is still
ind
i
cated by the LED (lights green when measuring, and blinks when not measur-
ing).
Be aware that power is still consumed even when the backlight is off, so be sure to
turn the M
emory HiLogger power switch off when not in use.
The screen background can be set to black or
white.
The beeper can be set to sound when an error occurs.
Enabling and Disabling the Backlight Saver
Selecting Black or White Screen Background
Select from the [Backlight Saver] setting options.
Setting options:( default setting)
Off
Disables the backlight saver func-
tion. The operating screen is al-
ways displayed.
1min, 2min, 3min,
4min, 5min
The backlight saver is activated if
the specified time is exceeded.
Black Background
White Background
Select from the [Display Color] setting options.
Setting options:( default setting)
Black* Make background black
White Make background white.
Enabling or Disabling the Beeper
Select from the [Beep Sound] setting options.
Setting options:( default setting)
On
Emit a beep sound on error messages (error
and warning displays).
Off Do not emit beep sound.
To Next Page
Loading...
