Record
Display the Setting screen
Configure measurement settings
Connect
Configure
Connect measurement cables (p. 31).
Configure input channels (p. 49)
Analyze
Analyze recorded data on the Waveform screen (p. 81).
Calculations can be applied to measured data (p. 113).
Save
Select and save data (p. 91).
When configuration is finished, start recording (p. 22).
Reload stored
settings (p. 103)
[Setting] screen
[Setting] screen
[CH] screen
Configure data
saving
[Setting] screen
(as needed)
Configure data recording settings (p. 42)
To Next Page
Loading...
