8.3 Making System Settings
127
3
8
Chapter 8 System Environment Settings
The following self tests are available. Results are displayed on the screen.
If any faults are found, have the Memory HiLogger re
paired. Contact your dealer or
Hioki representative.
Self-Test
1
2
Select the self test to
perform
Apply
Select the [System]
Screen.
Self-Test Details
KEY/LED
Tests the keys and LEDs for correct operation.
After every key has been pressed, the KEY/LED check finishes.
Pr
essing the START/STOP key also tests whether the LED lights.
If you notice a malfunction, press the SAVE
and START/STOP keys
simultaneously to abort the test.
LCD
Tests the screen display (color test, gradation test, character test)
The screen changes each time you press an operation key.
If the display screen seems abnormal, request repairs.
ROM/RAM
Tests the instrument's internal memory (ROM and RAM)
If "NG" appears, request repairs.
CF card
T
ests whether the Memory HiLogger recognizes the inserted CF card.
The CF card is formatted (p. 95)
USB
Memory
Tests whether the inserted USB flash drive is recognized by the HiLogger.
When the USB flash drive is recognized by
the instrument, its capacity and
peak current consumption will be displayed.
To Next Page
Loading...
