Hioki LR8431-20 - Appendix 5: List of Default Settings

Appendix 5 List of Default Settings
A10
When shipped from the factory or initialized to factory defaults, the settings are as
follows.
Appendix 5 List of Default Settings
Screen Setting Item Default Setting
Setting
Interval 10ms
Filter 60 Hz
Time/DIV 100ms/div
Cont On
Repeat Off
Numerical
Calc.
Off
Calc1 Off
Calc2 Off
Calc3 Off
Calc4 Off
Timer Off
Auto Save Off
CH
On/Off
CH1 to 10 and P1 to 4
all On
Input
CH1 to 10: Voltage,
P1 to 4:
Count
Range 100mV
Thermo cou-
ple
K
Burn Out Off
RJC Int
Count Mode Add
Pulse/Rev 1
Slope 
Disp Span Position
Zoom
Voltage and Revolve:
x1, Tc: x20
0 pos
Voltage: 50%, 
Tc and Revolve: 0%
Upper
Voltage: 0.05, 
Temperature: 100, 
Count and Revolve:
5000
Lower
Voltage: -0.05, 
Tc, Count and Re-
volve: 0
Scaling Off
Start Trig. Off
Stop Trig. Off
Alarm Off
Trig&
Alm
Trig Func Off
Timing Start
Trig Source
Start OR
Stop OR
Ext Trig
Start Off
Stop Off
Pre-Trig 0d 0h 0m 0s
Alarm Off
Source OR
System Start Backup Off
Backlight
Saver
Off
Backlight
Brightness
100%
Display Color Black
Beep Sound On
External Trig
In
Trigger
Time Disp Time
Language English
SAVE Key
Operation
Select & Save
Decimal Mark Dot
Separator Comma
USB memory
mode
USB Memory
Screen Setting Item Default Setting