Hioki LR8431-20 - Making System Settings

7.1 Calculation Methods
116
After measuring, calculation can be applied to a specified time span.
Make any other calculation settings before specifying the calcula
tion time span (p. 115).
Apply Calculations to a Specific Time Span 
(Manual Calculation Only)
1
3
Position the A/B cursors to define the calculation time
span.
To select which cursor to move: (p. 86)
Select the [Span] setting
option
2
Apply
Open the setting options
for the item to be set.
Select the calculation time
span
All, A-B, Start-A, Start-B, 
A-End, B-End
Select [Switch to Calc].
Apply
4
Select [Exec].
Apply
The results of calculations
are displayed.
Display A/B Cursors.
3
4
When you select [Switch to Calc] the calculation display screen appears, and A/B cur-
sor motion is enabled. However, changing to the [Wave+Calc] display hides the A/B
cursors (so they are not movable), although the calculation range can still be changed.
• All: The entire acquired waveform
• A-B: The time span between cursors
A and B
• Start-A:From the start of the acquired
waveform to cursor A
• Start-B:From the start of the acquired
waveform to cursor B
• A-End: From cursor A to the end of the
acquired waveform
• B-End: From cursor B to the end of the
acquired waveform