Hioki LR8431-20 - Auto Calculation

7.1 Calculation Methods
114
Numerical calculations are performed automatically after measurement.
Auto Calculation
Select the [Setting]
Screen.
Select [NumericalCalc.].
Apply
Open the setting options
for the item to be set.
Select [On].
1
2
3
Select any of [Calc1] to [Calc4].
Apply
Open the setting options for
the item to be set.
Select the calculation type.
Calculation types:
Average, P-P, Maximum, Minimum, Time To Max., Time To Min., 
(or Off, the default)
4
Enable Auto Save (if automatic saving is needed)
"Automatic Saving" (p. 97)
5
6
Start and finish measuring.
Analyze (p. 81)
The results of numerical calculations are displayed on the Waveform screen.