Hioki LR8431-20 - Viewing Input Signals as Numerical Values

5.2 Selecting Display Options
87
3
5
Chapter 5 Waveform Analysis
Numerical values can be displayed in three ways: numerical values only,
waveforms and numerical values, and numerical values and comments.
Displayed numerical values are those
of the current input signals.
To display waveforms and numerical values
To display numerical values and comments
To display numerical values only
Viewing Input Signals as Numerical Values
Select [Wave+Value].
1
2
Apply
Select the Waveform
Screen.
Select [Value+Cmnt].
1
2
Apply
Select the Waveform
Screen.
Select [Value].
1
2
Apply
Select the Waveform
Screen.
(Channels whose combination of mea-
surement value and unit based on the
scaling setting is longer than 13 charac-
ters are indicated by smaller display
characters.)