6.6 Transferring Data to a Computer (USB Drive Mode)
110
Data saved to a CF card can be transferred to a computer using the supplied
USB cable.
Before connecting the USB cable to the instrument, set the USB mode on the
[Syst
e
m] screen to [USB Drive].
To analyze data with the supplied Logger Utility program, refer
to
the pro-
gram’s instruction manual on the CD.
See: Appendix 9, "Using the Application Program" (p. A19)
6.6 Transferring Data to a Computer
(USB Drive Mode)
Select the USB Drive Mode
Select the [System]
Screen.
Select [USB Drive] on the
USB mode pull-down
menu.
Apply
A confirmation dialog ap-
pears.
1
2
3
Select [Yes].
Apply
The USB Drive Mode is enabled.
No other HiLogger operations are
available when the USB Drive Mode is
enabled. Also, HiLogger communica-
tions with the supplied Logger Utility
program are disabled.
See: "To exit USB Drive Mode" (p. 111)
4
Connect the USB cable (p.111)
To Next Page
Loading...
