Hioki LR8431-20 - Transferring Data to a Computer

6.3 Saving Data
102
Setting configurations can be saved as data files and later reloaded into the
Memory HiLogger when you need to make more measurements with the same
settings. 
Up to ten setting configurations can be saved to internal memory, and more
c
an be stored on a CF card or USB fla
sh drive.
Saving Setting Configurations
Select [Save Set.].
Apply
The Save dialog appears.
1
2
3
Select whether to save to
the LR8431-20’s memory
or to a CF card or USB
flash drive.
Apply
4
Setting configuration files are automatically named CONFnnnn.SET in a folder
named [HIOKI_LR8431]-[CONFIG] (p.91)
To reload a setting configuration (p.103)
(When [Memory] is selected)
Select [Save] for the con-
figuration instance (No.)
to save.
Enter a comment as
needed.
Apply
(When [CF Card/USB flash drive] is selected)
Comments entered on the [Comment]
screen are displayed here.
Select the [Setting]
Screen.