Appendix 10 Frequently Asked Questions
A38
Logger Utility
Question Remedial Action Reference page
What kind of program is the
Logger Utility?
Running on a PC connected to the
HiLogger by USB cable, it provides
real time data acquisition, display,
and calculation; display and analysis
of waveform (binary) data acquired
by the HiLogger; conversion of bina-
ry data to text (CSV
) data; and prin
t-
ing.
Logger Utility instruc-
tion manual
What is the method for con-
verting data to a text (CSV) file
with the Logger Utilit
y?
1. In the menu bar, select [File]-
[Save File in Text Format].
2. Select a file for CSV conversion
in the displayed dialog, and set
[CSV (comma separated)] as
the file type.
3. Make other settings as neces-
sary, and click the
[Save] button.
Logger Utility instruc-
tion manual
The Logger Utility cannot com-
municate with the LR8431-20.
Or
, warning 681 is displayed.
Set the USB mode setting on the
LR8431-20's [System] screen to
[USB Communication]. (However,
when [USB Communication] is se-
lected, USB flash drives cannot be
u
s
ed.) If the USB driver has not
been installed, install it. If the above
procedure cannot be used to estab-
lish communications, uninstall the
U
S
B driver by deleting "HIOKI 8423,
8430, LR8400 USB Driver" or "HIO-
KI Logger USB Driver" on the "Add
o
r
Remove Programs" screen under
"Control Panels." Then reinstall the
USB driver.
"Switching the USB
mode" (p.126)
"Installing the USB
Driver"(p.A23)
To Next Page
Loading...
