Hioki LR8431-20 - Specifying a Waveform Time Span

5.2 Selecting Display Options
86
Specify a waveform time span when saving a partial waveform or applying numerical
calculations (Trace cursors or Vertical cursors).
Specifying a Waveform Time Span
1
The A/B cursors and cursor values
are displayed.
3
Move the A/B cursors to specify the time span.
Select [Move].
2
Apply
Open the setting options
for the item to be set.
Select which cursor(s)
to move.
[Move]
A Cur
B Cur
AB Cur