Hioki LR8431-20 - Using CF Card and USB Flash Drive

5.2 Selecting Display Options
85
3
5
Chapter 5 Waveform Analysis
Cursor values can be displayed for all channels, or for only desired channels.
1
Displays the A/B cursors and the
values at the cursor positions.
To hide the cursor items again,
press the
SCROLL/CURSOR key.
2
Move the cursors to display numer-
ical values along the waveform.
Moving the Cursors
Select from the [Move] setting options.
A Cur
B Cur
AB Cur
( default setting)
Changing Cursor Type
Select from the [Type] setting options.
Trace
Vert (Vertical)
Horz (Horizontal)
( default setting)
Cursors
Selecting which channels
have their cursor values dis-
played
Select from the
[AB Crsr]
setting options.
• [All Ch]*
Displays all channels. The
cursor selected for [Move] is
displayed (select [AB Cur] to
display B – A difference val-
ues).
• [Ch Set]
Specify which channels to
display with A and B cursors.
The cursor values for the
specified channels are dis-
played.
( default setting)
Cursor Values for All Channels
Cursor Value for Specified Channels
To move cursors more quickly, hold the ESC key.