Appendix 9 Using the Application Program
A23
Appendix
Install the USB driver before you use the instrument with a USB connection.
Installing the USB Driver
1
(Insert the CD found in the package into the CD-ROM drive.)
Install the driver.
• Run [SetupDriver32.msi] in the CD.
If [Logger Utility] is already installed, run the CD from the following location.
[c:\Program Files\HIOKI\LoggerUtility\Driver\SetupDriver32.msi]
If you are using the WindowsVista/7/8
64bit version:
• Run [SetupDriver64.msi] in the CD.
If [Logger Utility] is already installed, run the CD from the following location.
[c:\Program Files(x86)\HIOKI\LoggerUtility\Driver\SetupDriver64.msi]
Depending on the environment, the dialog box may take some time to appear so please
w
a
it till it does so.
2
Click [Next].
3
Check [Next].
When you want to change the in-
stallation destination, click
[Browse…] to change the folder
to install into. Normally, there is no
need to change.
To Next Page
Loading...
