3.7 Viewing All Channel Settings in a List
64
All settings in the current window are reset to their factory default values.
Analog channel waveforms can be positioned evenly along the vertical grid,
with CH1 at the top. ([Ra
nge] screen only)
This functionality is valid only for channels with the s
a
me input time as CH1
and for which [Display range] has been set to [Setting: Position].
CH1 to CH10 waveforms can be displayed
to
gether with each allotted 5% or
10% of the screen height.
Initializing Settings (to factory defaults)
Select which screen you want to initialize,
from the [Range], [Scaling], [Trig & Alm] screens.
Select [Batch Proc].
1
2
Apply
The selected items are displayed.
3
Select [Reset all settings in
this page].
Apply
Aligning Zero Positions on the Grid
This setting is only available on the [Range] screen.
Select [Batch Proc].
1
2
Apply
The selected items are displayed.
Select the desired action.
Apply
To Next Page
Loading...
