Hioki LR8431-20 - Alarm Output Configuration

3.7 Viewing All Channel Settings in a List
65
3
3
Chapter 3 Setting before Measurement
All measured temperature values can be converted at once from Celsius to
Fahrenheit units.
The conversion is simultaneously reflected appropriately on all sc
aled value
s.
To revert from Fahrenheit units to Celsius, disable (set to Off) the s
caling func-
tion (p. 58).
Alignment Example (with CH1 zero-position aligned at 95% and occupying 10% of
vertical screen height)
Channel Zero-position (%)
CH1 95
CH2 85
CH3 75
CH4 65
CH5 55
CH6 45
CH7 35
CH8 25
CH9 15
CH10 5
CH10 0 V
100%
0%
50%
CH1 0 V
Display Celsius (°C) temperature values as Fahrenheit (°F)
This setting is only available on the [Scaling] screen.
Select [Batch Proc].
1
2
Apply
The selected items are displayed.
Select the desired action.
Apply