5.3 Inserting Event Marks (Search Function)
88
You can insert up to 100 event marks at any point
while measuring, to help find them later.
See "Searching Event Marks" (p. 90)
Event marks can be inserted while viewing waveforms
or by
applying external signals.
Use this procedure to insert event marks while viewing data on the Waveform/
Numeric
al Value screen during measurement. Event marks are numbered in
the sequence they are inserted.
5.3 Inserting Event Marks (Search Function)
Inserting Event Marks While Viewing Waveforms
Select [Event].
1
Event mark settings are displayed.
3
Apply
Select the Waveform
Screen.
Move to [Make Mark].
Press to insert an event mark.
Event numbers appear on the
waveform displayed when you
select
[Make Mark].
2
Select [Channel].
2
3
To Next Page
Loading...
