3.3 Setting Configuration 1 – Recording Settings
46
Measurement data can be automatically saved to a CF card or USB flash drive
while measuring.
The available types and formats of automatically saved data are as follows.
*1.Numerical calculation settings must be made before starting recording (p. 113).
*2.The [CSV (real time)] and [CSV + Calc] settings are not available when the
record
interval is 10ms or 20ms.
Also, when opening a CSV file in a spreadsheet program,
note that the number of rows that can be loaded at one time is limited (p. A7).
Automatic Saving
Saved
Content
Setting
File
Extension
Description
Waveform
da
ta only
Waveform
(realtime)
.MEM
Waveform data is saved to the CF card while re-
cording.
CSV
(realtime)*2
.CSV
Waveform data is saved in CSV text format while
r
ecording. Saved data cannot be reloaded in the
HiLogger.
Calcula-
tion results
on
l
y *1
Calc
(post meas.)
.CSV
After recording, calculation results are saved to
the
CF ca
rd.
When [Re
peat] is enable
d ([On]), calculation re-
sults for each recording are included in the record-
ed data file.
Waveform
d
ata an
d
calcula-
tion results
*1
Waveform +
Calc
.MEM,
.CSV
Waveform data is saved while recording, and cal-
culation results are saved when recording finishes.
CSV + Calc*2
.CSV,
.CSV
Waveform is saved in CSV text format while re-
cording, and calculation results are saved when
r
ecord
ing finishes.
Saved data cannot be reloaded in the HiLogger.
To Next Page
Loading...
