Chapter 10 Specifications
145
3
10
Chapter 10 Specifications
(3) Miscellaneous
Auto save function Waveform data (real-time), numerical calculation results (after
measurement), Power to the instrument must not be interrupted
while data is being saved.
Real-time saving Saves real-time waveform data to CF card in binary or csv format
Each recording length can be save in a separate file
Overwriting save is available
Up to 3.5 M data points in binary format can be loaded from a spec-
ified point (using one analog channel)
Power to the instrument must not be interrupted while data is being
saved.
Auto setup function Automatically loads settings from CF card at power on
Monitor function Indicates momentary values without storing data into memory
Waveform backup
time function
Memory is retained (backed up) while the Memory HiLogger is
turned off when a charged 9780 Battery Pack is present or with the
Z1005 AC Adapter connected.
Waveform backup time
100 hours with a 9780 Battery Pack after full charge
Saving of settings Up to 10 setting profiles can be saved in the instrument's memory.
Miscellaneous
Accessories
• Measurement Guide .......................................................1
• CD ..................................................................................1
(Instruction Manual (PDF), Logger Utility Instruction Manual
(PDF), Logg
er Utility (Dat
a acquisition application program)
• USB cable.......................................................................1
• Z1005 AC Adapter (with supplied power cord)............... 1
Options • Model 9780 Battery Pack (Ni-MH, 3.6V, 1500mAh)
• Model Z1005 AC Adapter
• Model 9782 Carrying Case
• Model 9812 Soft Case
• Model 9641Connection Cable (for pulse input)
• Model 9727 PC Card (256MB)
• Model 9728 PC Card (512MB)
• Model 9729 PC Card (1GB)
• Model 9830 PC Card (2GB)
• Model 9809 Protection Sheet
To Next Page
Loading...
