Appendix 1 Error Messages and Remedial Actions
A6
519
File system error
(directory error)
Turn the Memory HiLogger off and back on. If
the faul
t persists, perform system reset (p.125)
.
520
File system error
(invalid file type)
521
File system error
(file rename error)
522
File system error
(internal parameter error)
523
File system error
(block size error)
524
File system error
(semaphore error)
525
File system error
(not supported action)
680
Now in USB Communication mode.
Do not connect anything to USB
memory r
eceptacle.
(You can choose USB mode on
the System
scree
n.)
Disconnect the USB flash drive from the instru-
ment. To use a USB flash drive, set the USB
mode setting on the [System] screen to [USB
Memory] and then connect the USB flash drive.
681
Now in USB Memory mode.
Do not connect anything to USB
cable recept
acle.
(You can choose USB mode on
the System
scree
n.)
Disconnect the USB communication cable from
the instrument. To use USB communication
functionality, set the USB mode setting on the
[System] screen to [USB Communication] and
then connect the USB communication cable.
Message
Remedial Action
To Next Page
Loading...
