1.2 Measurement Flow
15
3
1
Chapter 1 Overview
Configure Input Channels (p. 38)
Select input channels, and set input types
and measurement ranges.
Make other settings as desired.
Move to a
setting item
Open the
setting options
Select Apply
Starting and Stopping Measurement
Press the START/STOP Key (p. 22)
Record once, and stop.
[Repeat]: Off
Stop
Measurement
Start
Measurement
When recording using the trigger function, recording occurs only
when the input waveform satisfies specified trigger criteria.
Record repeatedly.
[Repeat]: On
(default setting)
Data Analysis
View Measurement Data (p. 81)
Waveforms can be zoomed and numerical values confirmed.
Save Data (p. 91)
Measurement data, waveform data, screen images and numerical calculation
results can be saved.
Calculate (p. 113)
Numerical measurement data can be applied to calculations.
View on a Computer (p. A19)
Analyze recorded data using the supplied application program.
When Finished
Turn the Memory HiLogger Off (p. 34)
To Next Page
Loading...
