1.3 Names and Functions of Parts
17
3
1
Chapter 1 Overview
Top Panel
AC Adapter Socket
Connect the supplied Model
Z1005 AC Adapter (p. 30).
CF Card Slot
Insert an optional CF card. (p. 93)
Analog Input Terminals
Connect measurement leads for voltage mea-
surement, and thermocouples for temperature
(p. 31).
CHARGE LED
This LED lights when the
battery is charging (p. 29).
Pulse Input Connector
Connect an optional 9641 cable (p. 33).
External Control Terminals
Control signals can be received from and
output to external devices (p. 129).
Right Side
POWER Switch
Turns the instrument on and off (p. 34)
Power Off
Power On
USB Port
(USB 2.0 mini-B receptacle)
• Using the included Logger Utility applica-
tion software, you can monitor measure-
ment data on the computer and transfer
settings to the instrument. (p. A26) (To
use, set the USB mode on the [System]
screen to [USB Communication].)
• You can transfer data on the instrument’s
CF card to a computer. (p. 110) (To use,
set the USB mode on the [System]
screen to [USB Drive].)
USB flash drive Slot
(Type A USB 2.0
receptacle)
Used to save data to a
USB flash drive. (p. 94)
(To use, set the USB
mode on the [System]
screen to [USB Memory].)
The [USB Memory], [USB Communication], and [USB Drive] USB
mode settings are exclusive and cannot be used simultaneously.
To Next Page
Loading...
