Hioki PQ3198 - Page 11

Confirming Package Contents
5
The following options are available for the instrument. Contact your authorized Hioki distributor or reseller
when ordering.
The options are subject to change. Visit our website for updated information.
Options
Voltage measurement
 L9243 Grabber Clip
(CAT II, 1000 V, 1 A)
 9804-01 Magnetic Adapter
(CAT IV, 1000 V, 2 A)
 9804-02 Magnetic Adapter
(CAT IV, 1000 V, 2 A)
 L1000 Voltage Cord
 L1021-01 Patch Cord (red)
(CAT III, 1000 V, 10 A / CAT IV, 600 V, 10 A)
 L1021-02 Patch Cord (black)
(CAT III, 1000 V, 10 A / CAT IV, 600 V, 10 A)
Current sensors (current measurement)
 CT7126 AC Current Sensor
(60 A, φ15 mm, can be extended to 10 m)
 CT7131 AC Current Sensor
(100 A, φ15 mm, can be extended to 10 m)
 CT7136 AC Current Sensor
(600 A, φ46 mm, can be extended to 10 m)
 CT7044 AC Flexible Current Sensor
(6000 A, φ100 mm, can be extended to 10 m)
 CT7045 AC Flexible Current Sensor
(6000 A, φ180 mm, can be extended to 10 m)
 CT7046 AC Flexible Current Sensor
(6000 A, φ254 mm, can be extended to 10 m)
 CT7731 AC/DC Auto-Zero Current Sensor
(100 A, φ33 mm, can be extended to 2 m)
 CT7736 AC/DC Auto-Zero Current Sensor
(600 A, φ33 mm, can be extended to 2 m)
 CT7742 AC/DC Auto-Zero Current Sensor
(2000 A, φ55 mm, can be extended to 2 m)
 CT7116 AC Leakage Current Sensor
(6 A, φ40 mm, can be extended to 10 m)
 L9910 Conversion Cable (BNC-PL14)
 L0220-01 Extension Cable
 L0220-02 Extension Cable
 L0220-03 Extension Cable
Power supply
 Z1002 AC Adapter
 Z1003 Battery Pack
Carrying cases
 C1001 Carrying Case (Soft type)
 C1002 Carrying Case (Hard type)
 C1009 Carrying Case (Bag type)
Wiring adapter
 PW9000 Wiring Adapter
(For use with 3-phase
3-wire (3P3W3M) voltages)
 PW9001 Wiring Adapter
(For use with 3-phase 4-wire
voltages)
Recording media
 Z4001 SD Memory Card (2 GB)
 Z4003 SD Memory Card (8 GB)
Other
 PW9005 GPS Box
(Build-to-order)
 9642 LAN Cable
 Z5004 Magnetic Strap
 Z5020 Magnetic Strap
HIOKI PQ3198A961-02