Hioki PQ3198 - Changing LAN Settings

5.5 Changing LAN Settings
84
*: Select a setting other than [Current sensor] when using [Measure 1]. If [Current sensor] is selected,
[LAN] will be displayed for F4.
LAN
Set when connecting the PQ3198 to a computer with a LAN cable.
See:"Configure the Instruments LAN Settings" (p.180)
FTP server settings
Set when using the FTP server function to download files.
5.5 Changing LAN Settings
Setting Contents:
IP Address
Sets the IP address. (3 characters.3 characters.3
characters.3 characters (***.***.***.***))
Subnet Mask
Sets the subnet mask. (3 characters.3 characters.3
characters.3 characters (***.***.***.***))
Default Gateway
Sets the default gateway. (3 characters.3 charac-
ters.3 characters.3 characters (***.***.***.***))
Key operation during configuration
[SYSTEM] screen
[Main]
[LAN]
*
Select a setting
Display a
pull-down menu
to select a setting/
Select a value
to change
Select the setting/
change the value
Cancel
Accept setting
Setting Contents:
Authentification
Enable when trying to restrict connection to the
FTP server.
User name
Configure a user name used when connecting
an FTP client to the instrument.
Password
Configure a password used when connecting an
FTP client to the instrument.
HIOKI PQ3198A961-02