7.5 Displaying Flicker Values in Graph and List Form
138
This section describes how to display the following ΔV10 flicker statistics along with the time and date
once an hour:
• ΔV10 flicker 1-hour maximum value
• ΔV10 flicker 1-hour fourth-largest value
• ΔV10 flicker 1-hour average value
ΔV10 flicker statistics for the measurement period are displayed. Each ΔV10 value is updated once a minute.
• ΔV10 flicker overall maximum value
Displaying a ΔV10 flicker list
[TIME PLOT]
screen
[Flicker]
[List]
• Statistics are updated once an hour, and the ΔV10 flicker overall maximum value is
updated once a minute.
• The list is not displayed unless [
Flicker] is set to [ΔV10] in [SYSTEM]-DF1 [Main]-
F2 [Measure2].
To Next Page
Loading...
