12.2 Control and Measurement via Ethernet ("LAN") Interface
179
8
Chapter 12 Operation with a Computer
12
Measured data can be transferred to a computer remotely using an Internet browser or the FTP
server function.
Configure the instruments LAN settings for the network environment, and connect the instrument
t
o a computer with the Ethernet cable.
When using a wireless LAN router
The instrument does not support network environments
where an IP address is automatically acquired
using DHCP. Configure the router to assign a fixed IP address to the PQ3198. For more information
about router settings, see the instruction manual for your wireless LAN router.
12.2 Control and Measurement via Ethernet
("LAN") Interface
Ethernet Interface Jack
To computer’s LAN
interface
LAN cable
(The figure shows the 9642 LAN Cable [option].)
Example of remote operation using wireless LAN
Wireless LAN router
Computer
PDA
Tablet
computer
Wi-Fi
For details on how to use the included application software PQ ONE, see the accompanying
instruction manual (CD).
To Next Page
Loading...
