Hioki PQ3198 - Current Sensor Connections

3.2 Initial Instrument Preparations
40
Use the strap when carrying the instrument or suspending it from a hook during use.
Be sure to read " Using the Magnetic Adapter and Magnetic Strap" (p.13).
You can attach the instrument to a wall or panel (steel). Put the two pieces of Model Z5020 Magnetic
Str
ap (optional) through each of the strap loops of the instrument and attach the magnets to the wall or
panel.
The magnetic force varies depending on thickness and u
nevenness of steel panels. Check for lack of the
magnetic force so as not to let the instrument slip down.
Attaching the strap
Attach both ends of the strap securely to the instrument. If insecurely attached, the
instrument may fall and be damaged when carrying.
1. Feed each end of the strap
through the corresponding eye-
let on the instrument.
2. Feed each end of the strap
through its buckle.
3. Feed each end of the strap
through its loop.
Tighten securely to keep straps from
loosening or twisting.
1
1
2
3
Attaching the Z5020 Magnetic Strap
Strap loop
1
Put the strap through
the strap loop of the
instrument.
2
Put the strap through
the strap loop of
Model Z5020.
3
Put the strap
through the
buckle.
HIOKI PQ3198A961-02