10.1 Application functionality
169
10
Chapter 10 Analyzing Data Using the Application (PQ ONE)
The PQ ONE application (which ships with the instrument) provides functionality for analyzing
data from the instrument (saved in binary format) on a computer.
Refer to the Application Software Instruc
tion Manual (CD) for details.
Analyzing Data
Using the Application
(PQ ONE) Chapter 10
10.1 Application functionality
Displays and analyzes measurement data
Event statistics function allows analyzing measured data in detail.
Checking event status daily or hourly allows detecting events with higher frequency at spe-
cific a time or on a specific day of the week.
Easily creates the required graphs
Adjusting the display period of the trend graph when the output is good, and integrating the
trend data for 3 phases to a single graph is possible.
Generates measurement data reports
Contents displayed on the screen can be output without any modifications. No complicated
report settings are required, and the required reports can be created.
Displays measurement data in EN50160 mode
Converts measurement data to CSV format
Any range of measurement data can be converted to CSV format.
The converted files can be used in spreadsheet programs.
Judges anomalies based on the ITIC (CBEMA) curve* (Ver.5.00.0 or later)
*: The ITIC Curve is commonly used in the U.S. and is a standard for evaluating voltage
anomalies by specifying a range of acceptable tolerance. A “User-Defined Curve” can be
optionally defined for voltage anomaly evaluation.
Displays lists of file information including settings and the number of events
Dragging a folder containing measurement data displays lists of all data and event occur-
rences included in the folder.
To Next Page
