Hioki PQ3198 - Powering the Instrument On and Off

3.3 Pre-Operation Inspection
42
Before using the instrument the first time, verify that it operates normally to ensure that the no
damage occurred during storage or shipping. If you find any damage, contact your dealer or Hioki
representative.
3.3 Pre-Operation Inspection
Metal exposed
No metal exposed
Inspect the voltage cords
1
Do not use if damage is pres-
ent, as you could receive an
electric shock. Contact your
authorized Hioki distributor or
reseller if you find any damage.
2
Yes
Inspect the current sensors
Is the clamp cracked or damaged?
An error is
displayed
No
Yes
3
Yes
Inspect the instrument
Is damage to the instrument evident?
No
Contact your authorized Hioki
distributor or reseller if you find
any damage.
4
Yes
Inspection after turning on instrument
1. Does the self-test (model and version) dis-
play appear?
(The version number may be changed to the
latest version number.)
No
2. Is the [Wiring] page of the settings screen
being displayed?
The power cord may be dam-
aged, or the instrument may
have internal damage.
Please contact your authorized
Hioki distributor or reseller.
The instrument may be dam-
aged internally.
Please contact authorized
Hioki distributor or reseller.
Inspection complete
HIOKI PQ3198
POWER QUALITY ANALYZER
Ver 1.00
Is the insulation of the voltage cord to be
used damaged, or is bare metal exposed?
HIOKI PQ3198A961-02